Uniformly sprays water over two “bow tie” areas, each with an adjustable radius of up to 16 feet.

For use only with .710″ O.D. hose; ends are color coded for easy identification.

Growing chamber drain overflow tube grommet.

Non pressure compensating drippers with laminar flow take-apart design for easy clean out

Ideal for medium soil (loam). For landscape and container plants. Maintains a constant flow rate even on hillsides or long circuits.

Ideal for heavy soil (clay). For landscape and container plants. Maintains a constant flow rate even on hillsides or long circuits.

Use this barbed coupler to make branch lines off of 1/2″ tubing.

Push neatly cut edges of tubing approximatley 1″ onto coupler by using a twisting and pushing motion.

For use only with 1/2″ hose (.620″-.630″ O.D.)

For use only with 1/2″ hose (.620″-.630″ O.D.)

Use this fitting with a hose shut off and as a way to shut off an individual bed or row.

For use only with 1/2″ hose (.620″-.630″ O.D.); ends are color coded for easy identification.

1/2″ Elbow Female to Male.

Joins 1/2″ tubing to 1/2″ PVC pipe.

Laser drilled for square chambers only.

Use this sturdy black vinyl tubing to make your own hydroponic systems.

Main line for most drip installations.

Use this sturdy black vinyl tubing to make your own hydroponic systems.

Main line for most drip installations.

Use this sturdy black vinyl tubing to make your own hydroponic systems.

Main line for most drip installations.

Plastic Hose Clamps. Pack of 10. Simply snap on to hose. Quick removal one piece design. For securing standard aquarium hose.

Connects Raindrip low-flow sprinklers to 1/2″ male pipe thread sprinkler risers. Includes filter washer.

Uniformly sprays water over a quarter-circular area with an adjustable radius of up to 8 feet.

For use only with 1/4″ tubing Exclusive double-barbed design allows water pressures up to 50 PSI.

For use only with 1/4″ tubing. Exclusive double-barbed design allows water pressures up to 50 PSI.

For use only with 1/4″ tubing. Creates a 1/4″ branch from 1/4″ tubing, or two 1/4″ branches from a 1/2″ hose.

Four way intersection for use with 1/4″ tubing. Exclusive double-barbed design allows use with higher water pressures.

Use to retrofit non-adjustable sprinklers attached only to 1/4″ (.160″-.170″ I.D.) rigid poly risers.

A barbed end connector for attaching micro-tubing to mainline (1/2″ or 3/4″) tubing, for joining two pieces of micro-tubing together, or for connecting 1/4″ micro-tubing to 1/4″ Soaker Dripline.
The Long Transfer Barb has a long body and tapered ends. Some people prefer this style because it is easier to handle.

Use it the same as the regular transfer barb.

Non pressure compensating drippers with laminar flow take-apart design for easy clean out.

Ideal for light soil (sandy). For landscape and container plants. Maintains a constant flow rate even on hillsides or long circuits.

- Twin shut-off valves control water flow for two hoses.

- Cap type valve handles resist breakage.

- Longer legs prevent hose kinks at faucet.

- Full ball and retainer rings reduce leakage, even at low pressure.

- Durable, rustproof polymer construction.

- Not recommended for hot water use.

Use to remove sediment from your water.

Removes dirt particles from water supply and feeds plants automatically as they are watered. Recommended for well water. Includes hose/pipe swivel coupling. Polyester screen element.

Barbed fittings are simple slip in fittings that can be used for all Flatube or polyethylene irrigation tubing. Push the tubing over the end of the barb fitting until it feels snug. Use Hose Clamps to secure the tubing onto the barb fitting if water pressure is above 20 pounds.

Plastic Hose Clamps. Pack of 10. Simply snap on to hose. Quick removal one piece design. For securing standard aquarium hose.

For use only with 1/2″ hose (.620″-.630″ O.D.) Connects 1/2″ poly hose to faucet or other 3/4″ male hose thread. Includes filter washer.

For use only with 1/2″ hose (.620″-.630″ O.D.) Includes filter washer.

For use only with 1/4″ tubing (.245″ O.D.); connects 1/4″ tubing to faucet or other 3/4″ male hose thread. Includes filter washer.

Connects 3/4″ male pipe thread to 3/4″ male hose thread.

Includes filter washer.

For use only with 1/2″ hose (.620″-.630″ O.D.) Connects 1/2″ poly hose to 3/4″ male pipe thread. Washer included.

For use only with 1/2″ hose (.620″-.630″ O.D.) Washer included.

For use only with 1/4″ tubing (.245″ O.D.); connects 1/4″ vinyl tubing to 3/4″ male pipe thread.

Non pressure compensating drippers with laminar flow take-apart design for easy clean out.

This is a 4 way splitter for watering container plants that fits on the outlet end of any pressure compensating Netafim Woodpecker or Woodpecker Jr PC emitter. You can then water four container plants from a single emitter. Two of the splitters can be joined together to provide eight outlets by clipping the top off one of the units and inserting it into the bottom of the other splitter.

Woodpecker emiter also available.

- Premium nylon construction for maximum strength and durability

- Patented impact resistant clamp design

- Non-corroding high grade stainless steel screws will not strip when tightened

- Manufactured using highest level of quality control

- Leak proof, reusable

- For rubber or plastic hose

- Premium nylon construction for maximum strength and durability

- Patented impact resistant clamp design

- Non-corroding high grade stainless steel screws will not strip when tightened

- Manufactured using highest level of quality control

- Leak proof, reusable

- For rubber or plastic hose

- Premium nylon construction for maximum strength and durability

- Patented impact resistant clamp design

- Non-corroding high grade stainless steel screws will not strip when tightened

- Manufactured using highest level of quality control

- Leak proof, reusable

- For rubber or plastic hose

Fill/Drain fitting only, no screen or extension. 3/4 inch tube outlet.

Let the Dramm 1000 Redhead Water Breaker water your plugs or seedlings with the softest full-flow watering nozzle available. The 1000PL Redhead water breaker has over 1000 micro holes that create an ultra-soft flower shower which will not disturb delicate soil or harm tender plants. Use a Dramm In-Line Hose Filter to keep the nozzle from clogging.

The 170 Water Breaker is excellent for watering in areas with low water pressure or with systems which restrict total water volume. It is designed for small containers (hanging baskets), and when using fertilizer syphons. Adjust water flow to 50% of its possible volume. Cast aluminum with 3/4 brass hose threads.

This nozzle attaches to your standard garden hose or watering wand. A perforated screen allows water to pass through it, but prevents a strong, direct stream which could cause water stress to your plants. The full head offers quick watering and a fast stream, enabling the water to soak deeply into the soil. The sturdy die-cast aluminum head will withstand years of use. Keep your plants hydrated with this Water Breaker Hose End.

Watering handle – Connects to standard watering hose – Threaded head is compatible with Dramm nozzles – Comfortable grip – Angled top can water hard to reach places – Aluminum tubing and brass couplings.

Dramm water wands are professional implements designed to eliminate the stretching and stooping associated with watering, while providing a soft, “full-flow”, flower shower.

Dramm watering wands allow you to water hard-to-reach areas with ease. You can water at the base of a plant (in order to keep water off leaves) or extend your reach when watering hanging baskets or window boxes.

The Dramm Fogg-It Nozzle has three jets that break the water into a fine mist. Produces a gentle spray on soil and seedlings and works effectively with both high and low pressures. Fits all standard garden hose threads.

The Dramm Rain Wand is ideal for watering flower beds, gardens and shrubs. It includes the original ‘soft-touch’ 400 Water Breaker nozzle, which has been used by professional growers and nurserymen since 1945.

With the Rain Wand, you are able to apply large quantities of water quickly at the plant base, where it soaks deep into the soil. The fingertip shut-off valve reduces overall water consumption by applying water where and when you want it.

Roots grow deep and the plant is protected from water stress while it receives the constant nutrition it needs. This model has a wand length of 24 inches.

Designed to water plants in containers on porches, patios and decks, the Patio Plant Wand produces a soft, concentrated stream which allows you to water your plants, not your patio!

The smaller 170 Water Breaker nozzle, 16-inch handle and shut-off valve allow the gardener easy access to hard-to-reach plants.

The fingertip shut-off valve reduces overall water consumption by applying water where and when you want it.

Roots grow deep and the plant is protected from water stress while it receives the constant nutrition it needs.

- Water fragile plants, delicate seedlings or plant cuttings

- Produces an extra fine, hollow cone mist pattern-Inch

- Sprays 1/2 gallon of water per minute

- Made in the U.S.A. from solid brass

Simplify hand watering jobs with this plastic shut off valve. The plastic shut-off valve fits standard 3/4″ hose fittings.

The Dramm Thumb Valve was designed to allow for single handed quick and easy watering. A gentle squeeze the thumb lever and the water is on. Simply release the lever and the water is off.

The thumb valve is made from chrome plated, die cast zinc and brass. Attaches to 3/4-inch male & female hose threads.

General Hydroponics Dual Diaphragm air pump is the only air pump in the world that is manufactured exclusively for use with hydroponics systems. This high output pump (394 gph/ 24,800 cc/minute capacities) has four adjustable 1/4″ outputs or valves that can be teed off twice to power up to eight WaterFarm units. In addition, growers who use the Dual Diaphragm air pump can count on it to reliably oxygenate their reservoir with air stones.

For the Dutch Leach Tray.

For the Dutch Leach Tray.

Screen fitting only, no screen or extension.

Coiled spring faucet extension with solid brass couplings.

- Protects hose and prevents kinks at faucet.

- Allows hose to bend at sharp angle and maintain even water flow.

Fill/drain fitting (custom bulkhead fitting with 1/2″ screen, nut and O-ring).

Can also be purchased as part of Fitting Kit

- Hose Coupling Filter Washers

- Molded-in metal screen

- Fits all hose couplings

- Three per package

For use only with 1/2″ hose. Compression inlet/outlet shut-off for 1/2″ hose.

Features a vortex water passageway that helps prevent cloggage.

Convert existing 1/2″ underground sprinkler systems to low flow watering where a drip circuit can’t be set up.

Uniformly sprays water over a circular area with an adjustable diameter of up to 15 feet.

Sprays 12 individual streams of water over a circular area with an adjustable diameter of up to 18 feet. (For windy conditions)

Sprays 12 individual jet streams of water over a circular area. For flowers, ground cover and hillsides.

Uniformly sprays water over a circular area with an adjustable diameter of up to 15 feet.

Adjustable flow and spray. Rigid riser moves up or down to water above plants.

Adjustable flow and spray. Rigid riser moves up or down to water above plants.

Uniformly sprays water over a circular area with an adjustable diameter of up to 15 feet. Includes heavy duty 8″ stakes with 4″ risers.

Uniformly sprays water over a semicircular area with an adjustable radius of up to 7 feet.

- Easily connects hose to sprinkler, nozzle or other hose end accessories.

- Includes 1 female hose end connector with shut-off and 2 male hose end adapters.

- Durable, rustproof polymer construction.

- Interchangeable with most polymer quick connector systems.

- 1 Female for 3/8″ (9.5 mm) and 1/2″ (12mm) Hose.

- Repairs damaged hose for a secure, leakproof connection

- Premium nylon construction for maximum strength and durability

- Patented impact resistant clamp design

- Non-corroding high grade stainless steel screws will not strip when tightened

- Manufactured using highest level of quality control

- Leak proof, reusable

- For rubber or plastic hose

Hose fittings with an inline ball valve for shutting off individual rows in a garden or for breaking up a larger area into smaller systems.

Converts a traditional underground sprinkler system to a micro irrigation drip system.

Waters up to eight plants with one unit. Fully adjustable ports that can be set individually up to 30 GPH.

Swivel arm aids in fine-tuning outlet tubing position. Built in filter extends system lifespan by preventing clogging from debris.

This fitting is used to end a drip line. The screw off cap makes it easy to flush a line in your drip system.

These PVC fittings give you a flexible, compact manifold for almost any valve situation. All swivel pieces are 1″ pipe thread (with O rings) which can be easily reduced for 3/4″ valves. All manifold parts are 1″ MPT unless noted. No tools or glue are required and the maximum working pressure is 150 PSI. Add ons are a breeze.

These PVC fittings give you a flexible, compact manifold for almost any valve situation. All swivel pieces are 1″ pipe thread (with O rings) which can be easily reduced for 3/4″ valves. All manifold parts are 1″ MPT unless noted. No tools or glue are required and the maximum working pressure is 150 PSI. Add ons are a breeze.

These PVC fittings give you a flexible, compact manifold for almost any valve situation. All swivel pieces are 1″ pipe thread (with O rings) which can be easily reduced for 3/4″ valves. All manifold parts are 1″ MPT unless noted. No tools or glue are required and the maximum working pressure is 150 PSI. Add ons are a breeze.

Use these drippers when you want to make your own In-Line emitter tubing out of 1/4″ tubing. For unevenly spaced plants or where multiple emitters are needed for larger plants just add more emitters. It’s also easy to add these emitters into existing 1/4″ lines at any time. To use, cut the 1/4″ tubing where you want an emitter and insert the barbed ends into the tubing.

Features a vortex water passageway that helps prevent cloggage. Use with 12″ rigid riser.

Features a vortex water passageway that helps prevent cloggage. Use with 12″ rigid riser.

Use to spray ferns and tropical plants in hanging baskets, greenhouses and atriums.

Overflow fitting (PVC tube and adapter with 1″ screen). Can also be purchased as part of Fitting Kit

Basic container drippers with a 2 inch hold down stake and a 1/4″ threaded inlet. NOTE: A 1/4″ transfer barb and 1/4″ tubing are needed to connect this emitter to the mainline. These also can be used with 1/8″ tubing.

Basic container drippers with a 2 inch hold down stake and a 1/4″ threaded inlet. NOTE: A 1/4″ transfer barb and 1/4″ tubing are needed to connect this emitter to the mainline. These also can be used with 1/8″ tubing.

Basic container drippers with a 2 inch hold down stake and a 1/4″ threaded inlet. NOTE: A 1/4″ transfer barb and 1/4″ tubing are needed to connect this emitter to the mainline. These also can be used with 1/8″ tubing.

Punches holes in 1/2″, 5/8″, or .710″ hose to insert PC drippers or 1/4″ fittings. Comfortable design.

Adjustable flow and spray. Rigid riser moves up or down to water above plants

For flowers, ground cover and hillsides.

Use this sturdy black vinyl tubing to make your own hydroponic systems.

Main line for most drip installations.

Main line for most drip installations

Main line for most drip installations

Use sturdy black vinyl tubing to make your own hydroponic systems.

-Easy to use

-Flexible thick wall tube

-Six convenient sizes 100 foot rolls

-Convenient dispenser packs

Use this sturdy black vinyl tubing to make your own hydroponic systems.

Main line for most drip installations.

Use sturdy black vinyl tubing to make your own hydroponic systems.

-Easy to use

-Flexible thick wall tube (wall thickness 0.070)

-Six convenient sizes 100 foot rolls

-Convenient dispenser packs

Use this sturdy black vinyl tubing to make your own hydroponic systems.

Main line for most drip installations.

Use this sturdy black vinyl tubing to make your own hydroponic systems.

Main line for most drip installations.

-Easy to use flexible thick wall tube (wall thickness 0.070)

-Six convenient sizes 100 foot rolls

-Convenient dispenser packs

These all stainless steel hose clamps will not rust and feature a smooth inner surface that will not damage hosing.

Converts 1/2″ sprinkler riser to a 1/2″ double drip manifold. Connects two 1/2″ poly hoses to a 1/2″ sprinkler riser. Includes tee, filter, 3-way connector and two flow controls.

PC emitters deliver a precise amount of water regardless of changes in pressure due to long rows or changes in terrain. They can simplify the designing of a system and greatly reduce maintenance since they rarely get plugged.

Inside the emitter is a flexible diaphragm that regulates the water flow and tends to flush particles from the system (self-flushing).